Stripping Tools

Stripping Tool Design

A high quality conductive connection requires the proper removal of the cable sheath and careful stripping of individual conductors. The cable sheath can be removed quickly and proberly using a suitable sheath removal tool. The individual conductors must be stripped clean to the correct length and without damage in the contact area. Stripping tools are designed with stripping holes to make one or more defined conductor cuts.

Pliers with circular cutting holes are only suitable for stripping the cross-section they are designed for. Risk of confusion, which leads to conductor damage, arises when there are several hole diameters. Therefore, care must be taken when choosing the pliers to use for a particular job. Self-adjusting insulation strippers automatically adjust to the diameter or insulation thickness. This greatly aids users as the risk of damaging the conductor is eliminated. Cables up to 16mm2 can be stripped using these tools. The cutting depth of the blades can be closely adjusted for different materials, while the length stop facilitates series stripping.

Automatic Self-adjusting Insulation Stripper & Ferrule Crimp Tool (MultiStrip® 10 plus)

P/N 707 070 RT

Request quote and/or buying option available.

Suitable for single- and multi-conductor cables with PVC insulation and a wide range of special insulation types, such as PTFE and rubber insulation
Precise and Self-Adjusting
Built-in wire cutter
With adjustable length stop for precision work 11/16" | 18 mm
Stripping Capacity: 32 - 8 AWG | 0.03 - 10.0 SQ-MM
Crimping Capacity: 24 - 12 AWG | 0.25 - 4.0 SQ-MM

Automatic Self-adjusting Insulation Stripper (MultiStrip® 16)

P/N 707 040 RT

Request quote and/or buying option available.

Applicable for fine, flexible and solid cables
Quickly and precisely
Built-in wire cutter
With adjustable length stop for precision work 11/16" | 18 mm
Stripping Capacity: 28 - 6 AWG | 0.08 - 16 SQ-MM

Automatic Self-adjusting Insulation Stripper (MultiStrip® 10)

P/N 707 020

There is a newer model of this item available P/N 707 040 RT.

Request quote and/or buying option available.

Fully automatic self-adjustment to commercially available multi- and fine-strand conductors with standard insulation
Applicable for multi-wire PVC-, and a large variety of rubber-insulated cable
Built-in wire cutter
Length stop for pre-adjustment of stripping length up to 11/16" | 18 mm
Stripping Capacity: 32 - 8 AWG | 0.03 - 10 SQ-MM

Insulation Stripper for Special Applications with shaped blades

P/N Please look here

Special hand tool for high-quality stripping and dismantling of single- and multi-wire cable
With an adjustable length stop
No pinching of deforming of cable ends by a special cutting mode
Over 53 interchangeable blades for different wire ranges (Please take a look)