P/N 103 220 2 RT
Request quote available.
- With opening spring and locking lever
- Punched and stamped from high-strength sheet steel
- With six replaceable punches: 5/64-inch, 3/32-inch, 1/8-inch, 9/64-inch, 5/32-inch, and 13/64-inch
Assembly Tools
Assembly Tool Design
These assembly and auxiliary tools have become indispensable for electromechanics and electricians. Measuring crimp dimensions of crimped connectors, inserting or removing contacts, ITC termination of UTP and STP cables into trunks are typical scenarios in this field.
P/N 783 000 61
Request quote and/or buying option available.
- Usable with Heavy Duty snap rings from a diameter of 400 - 1000 mm (15-40 inch)
- Securely opens, closes and holds rings thanks to a self-locking precision spindle action
- For fitting and removing circlips in one operation
Request quote and/or buying option available.
Heavy Duty Retaining Ring Pliers with locking device (can be released). Pliers with straight tips and 90° bent tips available.
Request quote and/or buying option available.
Heavy Duty Retaining Ring Pliers with locking device (can be released). Pliers with straight tips and 90° bent tips available.
Request quote available.
Notching Pliers for notching out of rubber gaskets of glass cladding panels for buildings.
P/N 503 618 3
Request quote and/or buying option available.
- Special tool to cut out side walls of wiring ducts
- Variable cutting depth up to 80 mm with one cut
- Neat cutting edges, down to the base of the duct
- Without burrs or cracks
Request quote and/or buying option available.
Hand held wire duct cutter. Will cut width up to 2 1/4 inches. This high quality hand held cutter will produce burr free cuts. The user will experience an evenly cut over the entire blade length. This precise wire duct cutter has ergonomic handles producing less fatigue to the user. The hardened blades are exchangeable.
Request quote and/or buying option available.
- For notching plastic skirtings, cases and cable ducts for sanitary and electric installation
- Available with different cutting profiles and grip lengths
- Easy shear-action draw cut
- Neat cut edges, precise cuts in the rubber lips on skirtings
- Easy handling with automatic spring opening after notching
- Cutting head of special tool steel
- Black-Oxide finish
- Plastic coated grips or two-component handles
- Solid design and low weight
P/N 449 250 2
- Remove upholstery clips without damaging
- For round clips
P/N 690 001
Request quote and/or buying option available.
This absolutely ergonomic plastic open end spanner is for tigthen and loosen of the cable gland. You can use this key also for breaking connections (open the locking) after they already been locked together.
- Tighten and loosen of the cable gland
- Open the locking
- Set of two